The toilet is, of course, an important and sensitive part of any place inhabited by humans. It is therefore, important to learn how to maintain and repair a toilet; including a toilet flange repair. A leaking toilet is not only an inconvenience but an eyesore and a health hazard. When a toilet flange breaks, the toilet is likely to leak and make matters worse.
How Does a Toilet Flange Work?
The flange sports a metallic or plastic ring used to hold the toilet fastened to the floor. If this ring breaks, it may well signal you to stop using the toilet. The flange is used to hold the toilet in place so as to maintain the sealed vents. If the flange is broken, it means that your toilet will start rocking. Once this begins, you soon discover that the wax ring also breaks. This is the onset of the toilet inconvenience in your premises because water starts leaking from the spaces around the base of your toilet. Generally, although fixing a broken flange isn’t easy, it is possible. The best solution is to purchase flange rings that you can use to cover the whole area of the flange. Once you have these, push the new flanges to merge in with the ones already there.
Repair Process – Step By Step
i. Stop any water flow to the toilet flush tank by turning off the facet. Flush out any water in the tank until its empty. Unscrew the whole toilet from its flange using a wrench and set it on the side; preferably on a soft surface such as a cloth, rug or newspaper.
ii. Scrub off the old wax from the base surface of the flange. A paint scraper can do a good job at this. Assess the damage and decide whether to use a flange replacement push-in or whether a repair plate will do.
iii. Remove the screws from the repair plate with a screw driver. Use a slot screw driver in prying up the broken track so that you can slide the plate.
iv. Align the tracks of the flange and the repair plate. Drive in the screws into the same holes they were so that they hold the repair plate and the flange
v. If you are set to repair the flange with a ring, leave it fastened to the subfloor by the screws. Now, put the ring on the old flange, align the inserted tracks and fasten the ring onto the subfloor via the screw holes offset.
vi. Make sure you that you uproot the old ring by use of the replacement flange. This can be done by firstly unscrewing it and cutting across using a hacksaw. Separate the ring from the flange by use of slot screw driver
vii. Insert the replacement the opening of the flange and push it down until you see it flush with the toilet floor. Fasten it to the floor with the old screws you removed from the broken ring.
viii. Now, attach the heads of your toilet closet bolts to the lower side of the plate repaired. Place fresh wax on the opening of the flange. Replace your toilet and fasten it to the flange. Return the water horse in its place and turn the water back on. Your toilet flange repair process is over now.
Tags: Plumbers Nearby In Your Neighborhood